Component Replacement Procedures - Sun Microsystems Sun Fire X2100 M2 Service Manual

4.5

Component Replacement Procedures

The following components are customer-replaceable units (CRUs):
I/O board (see
■
PCIe cards and risers (see
■
Assembly" on page
Hard disk drives and carriers (see
■
and Carrier" on page
LSI PCIe cards and cables (see
■
Cables" on page
ODD (DVD or CD) drive (see
■
Drive Assembly" on page
Air duct (see
■
Power supply (see
■
Single fan modules (see
■
Dual blower module (see
■
page
Memory DIMMs (see
■
Battery (see
■
Cable kit (see
■
The following components should be replaced only by trained field service
technicians:
CPU - replacement (see
■
page
Motherboard (see
■
4-6 Sun Fire X2100 M2 Server Service Manual • December 2006
Section 4.5.1, "Replacing the I/O Board" on page
Section 4.5.2, "Replacing the PCIe Card and Riser
4-9)
4-12)
4-14)
4-19)
Section 4.5.6, "Replacing an Air Duct" on page
Section 4.5.7, "Replacing the Power Supply" on page
Section 4.5.8, "Replacing the Single Fan" on page
Section 4.5.9, "Replacing the Dual Blower Module" on
4-28)
Section 4.5.10, "Replacing Memory Modules" on page
Section 4.5.11, "Replacing the System Battery" on page
Section 4.5.13, "Replacing Cables" on page
Section 4.5.12, "Replacing a CPU and Heatsink" on
4-38)
Section 4.5.14, "Replacing the Motherboard" on page
Section 4.5.3, "Replacing a Hard Disk Drive
Section 4.5.4, "Installing an LSI PCIe Card and
Section 4.5.5, "Removing and Installing an ODD
4-7)
4-22)
4-24)
4-26)
4-31)
4-35)
4-43)
4-44)