Sun Microsystems Sun Fire X2100 M2 Service Manual page 5

4.1 Tools and Supplies Needed 4-1
4.2 Installation Precautions 4-2
4.2.1 ESD Precautions 4-2
4.2.2 Preinstallation Instructions 4-2
4.2.3 Postinstallation Instructions 4-3
4.3 Powering Off the Server and Removing the Cover 4-3
4.4 Locations of Server Components 4-5
4.5 Component Replacement Procedures 4-6
4.5.1 Replacing the I/O Board 4-7
4.5.1.1
4.5.1.2
4.5.2 Replacing the PCIe Card and Riser Assembly 4-9
4.5.2.1
4.5.2.2
4.5.3 Replacing a Hard Disk Drive and Carrier
4.5.3.1
4.5.3.2
4.5.4 Installing a LSI PCIe Card and Cables 4-14
4.5.4.1
4.5.4.2
4.5.5 Removing and Installing an ODD Drive Assembly 4-19
4.5.5.1
4.5.5.2
4.5.6 Replacing an Air Duct 4-22
4.5.6.1
4.5.6.2
4.5.7 Replacing the Power Supply
Removing the I/O Board 4-7
Installing the I/O Board 4-8
Removing the Riser Assembly and PCIe Card 4-9
Installing the PCIe Card and Riser Card Assembly 4-
10
Removing an HDD and Carrier 4-12
Installing an HDD and Carrier 4-13
Installing the LSI Card to Support SAS Hard Drive
Installation 4-14
Installing the LSI Card to Support SATA RAID 4-17
Removing an ODD Drive Assembly 4-20
Installing the ODD Drive Assembly 4-21
Removing the Air Duct 4-22
Installing the Air Duct 4-23
4-12
4-24
Contents v