Operation; Starting The Generator Set - Hyundai HY1000SI User Manual

Check the air filter:
WARNING
Never run the engine without the air filter. Rapid engine
wear will result from contaminants, such as dust and dirt,
being drawn through the carburetor, into the engine.
1. Loosen the cover screws, nuts and remove the maintenance
cover. Remove the air filter cover and the air filter sponge (Refer to
Fig. 3.4)
2. Observe the sponge for cleanliness
3. Clean sponge with soap and water or solvent. Squeeze dry
and then soak in clean engine oil. Squeeze out all excess oil and
reinstall.
4. Replace the sponge if it is damaged
14.

4. OPERATION

4.1: STARTING THE GENERATING SET
NOTICE
-A hot engine will not start if there is too much gasoline in the cylin-
der. If this happens, wait for 5 to 10 minutes for the engine to cool
down before starting
-The engine will stop automatically when it is out of gasoline
Air filter sponge
Air filter cover
Fig. 3.4
Maintenance Cover
Screws