Connecting The Connection Cord - Samsung MH026FKEA Installation Manual

Connecting the Connection Cord

The indoor unit is powered from the outdoor unit via the connection cord.
1 Remove the screw on the electrical component box and remove the cover
plate.
Route the connection cord through the side of the indoor unit and connect
2
the cable to terminals; refer to the figure below.
3 Route the other end of the cable to the outdoor unit through the ceiling &
the hole on the wall.
4 Reassemble the electrical component box cover, carefully tightening the
screw.
Wiring Diagram
Indoor Unit
Outdoor Unit
Power Communication
I I U
NSTALLING THE NDOOR NIT
17
E-