Connecting The Connection Cord - Samsung AVMBH020CA0 Installation Manual

Connecting the Connection Cord

The indoor unit is powered from the outdoor unit via the connection cord.
Remove the screw on the electrical component box and remove the cover
1
plate.
2 Route the connection cord through the side of the indoor unit and connect
the cable to terminals; refer to the figure below.
3 Route the other end of the cable to the outdoor unit through the ceiling &
the hole on the wall.
Reassemble the electrical component box cover, carefully tightening the
4
screw.
Wiring Diagram
Indoor Unit
Outdoor Unit
Communication
Next Indoor unit(Power)
Next Indoor unit
(Communication)
Power
15
E-