Table 1-13 Leds On The Front Panel Of The S3928P-Pwr-Ei - Huawei Quidway S3900 Series Installation Manual

Installation Manual
Quidway S3900 Series Ethernet Switches

Table 1-13 LEDs on the front panel of the S3928P-PWR-EI

LED
Power
LED
DC-input
LED
Mode
LED
Mark Color
Solid green
Flashing green (1 Hz)
PWR
Solid red
Flashing yellow (1 Hz)
OFF
Solid green
RPS
Solid yellow
OFF
Speed Solid green
Mod
e
Duplex Solid yellow
Flashing
PoE
(1 Hz)
Huawei Technologies Proprietary
1-28
Chapter 1 Product Overview
Indicates
The system
Power-On Self-Test (POST)
and is operating normally.
The system is going through
the POST or is downloading
software.
The POST of the system fails or
a serious fault is detected.
Some ports fail to pass the
POST and some functions are
disabled.
The power is disconnected.
Both the internal AC power
supply and the DC input are
normal.
The internal AC power supply
fails or is disconnected, but the
DC input is normal.
The DC input is not connected.
10/100 Mbps duplex mode,
state of the 1000 Mbps SFP
ports, or fabric state.
10/100 Mbps duplex mode,
state of the 1000 Mbps SFP
ports, or fabric state.
green PoE information on 10/100M
port.
passes the