Loading Software Locally; Table 5-2 String To Input For The Attribute - Huawei Quidway S3900 Series Installation Manual

Installation Manual
Quidway S3900 Series Ethernet Switches
File Number
======================================================================
1(*)
2(b)
3
Free Space: 2682880 bytes
(*)-with main attribute
(b)-with backup attribute
(*b)-with both main and backup attribute
Please input the file number to change:
III. Set the attribute of file 2 to main.
Please input the file number to change: 2
Please input the file attribute to change (main/backup): main
The attribute of s3900-1.app is changed from main to none!!
When setting the attribute of a file, you can use the strings listed in the following table.
The strings are case-insensitive.

Table 5-2 String to Input for the Attribute

main
backup
If a file has neither the main attribute nor the backup attribute after you change the
attributes of other files, the device will give the file the attribute of none and display an
alert message.
IV. If you change the attribute of an application file to main, the device will
display a message for you to confirm whether you want to boot the device
immediately.
Do you want to run s3900-2.app now? Yes or No(Y/N) y
If you enter y, the device will reboot immediately. If you enter n, the device will return to
the [Select application file to boot] submenu.

5.3 Loading Software Locally

If your terminal is directly connected to the switch, you can load Boot ROM and host
software locally. But before that, make sure they are correctly connected.
File Size(bytes)
4719134
3886308
3886308
Attribute
Huawei Technologies Proprietary
5-4
Chapter 5 Loading Boot ROM and Host Software
File Name
s3900.app
S3900-2.app
S3900-3.app
String to input
m, ma, mai, or main
b, ba, bac, back, backu, or backup