Huawei Quidway S3900 Series Installation Manual page 73

Installation Manual
Quidway S3900 Series Ethernet Switches
Mac Address
Press Ctrl-B to enter Boot Menu... 5
To enter the Boot Menu, press <Ctrl+B> within five seconds after the message "Press
Ctrl-B to enter Boot Menu... 5" appears. If not, the system automatically boots and
displays:
Auto-booting...
Decompress
Image..............................................................
...................................................................
...................................................................
...................................................................
...................................................................
...............................................OK!
Starting at 0x80100000...
User interface aux0 is available.
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the switch has
completed its automatic boot.
Press <Enter>; the system displays:
<Quidway>
You can configure the switch now.
: 0x00e0fc003900
Initialize LSJ1LTSE........................OK!
SDRAM fast selftest........................OK!
Flash fast selftest........................OK!
CPLD selftest..............................OK!
Switch chip selftest.......................OK!
PHY selftest...............................OK!
Please check port leds...............FINISHED!
Huawei Technologies Proprietary
4-7
Chapter 4 Starting up the Switch at the Initial Boot