Models Ir60-280L, Gcm60-280; Models Ir48-280L Ir72-280L, Gcm48-280; Gcm72-280; Models Ir48-280L Or Gcm48-280 Mounting To - Garland IR36-280L Installation & Operating Manual

Models IR60-280L, GCM60-280

1. Back of range must be easily accessible.
2. Fasten mounting bracket to burner box back as
shown using four (4) of #10 x ½" type "A" truss
head SMS, Phillips.
3. Position salamander on rear of range slipping
uprights into burner box sides and mounting
bracket.
4. Make sure front panel is in front of stabilizer
bracket.
5. Securely fasten using hardware shown.
Models IR48-280L IR72-280L,
GCM48-280, GCM72-280
1. Back of range must be easily accessible.
2. Position salamander on rear of range slipping
uprights into burner box sides.
3. Make sure front panel is in front of stabilizer bracket
on 72" range.
4. Securely fasten hardware shown.
Page 10
INSTALLATION Continued
Top
Mounting
Bracket
Bottom
Upright
Burner Box
Back
Stabilizer
Bracket
Mounting
Bracket
Models IR48-280L or GCM48-280 Mounting
to 48" Range with one Full Size Oven
1. Back of range must be easily accessible.
2. If mounting to a double oven, remove oven flue
from left side looking at rear of unit.
3. Place salamander in place and fasten securely, using
hardware shown.
4. Re-install oven flue
End Support Bracket
# 10 x 3/4"
Phillips Truss
Head
From Back Flange
Back Flange
Rear View
Remove Oven Flue for H/P288 Double Ovens Only
Upright
Burner
Box Side
Stabilizer
Bracket
1/4" x 3/4"
Type "B" Washer
Hex Head (8 Req'd)
1/4" 20 x 3/4" Hex
Head Self Tapping
Screws (2 ea. Side)
&
1/4 x 2/4 Washer
(2 ea. Side)
Center Support
Use Existing # 10 Sheet Metal Screws
Part # 1382669 (07/05)