Slideshow - Pentax R07020 Operating Manual

Slideshow

You can play back recorded still pictures and movies one after another.
1
Enter Q mode and use the four-way controller (45) to
choose the image to start the slideshow with.
2
Use the four-way controller (2345) to select
u (Slideshow) from the Playback Mode Palette.
3
Press the 4 button.
The slideshow setting screen appears.
4
Use the four-way controller (23)
to select [Start].
5
Press the 4 button.
The slideshow starts.
Pressing the 4 button during the slideshow pauses the slideshow. To resume
the slideshow, press the 4 button again.
6
Press any button other than the 4 button.
The slideshow stops.
To Set the Slideshow Conditions
You can set the playback interval, a screen effect and sound effect for when one
image changes to the next.
1
Use the four-way controller (23)
to select [Interval] in step 4 on
p.117.
2
Press the four-way controller (5).
A pull-down menu appears.
Slideshow starts Slideshow starts Slideshow starts
Start
Interval Interval Interval
3sec. 3sec. 3sec.
Wipe Wipe Wipe
Screen Effect Screen Effect Screen Effect
Sound Effect Sound Effect Sound Effect
MENU
Start
Interval Interval Interval 3sec. 3sec. 3sec.
Wipe Wipe Wipe
Screen Effect Screen Effect Screen Effect
Sound Effect Sound Effect Sound Effect
MENU
4
OK OK OK
OK OK OK
117