Slideshow; Resize - Pentax OPTIO M90 Operating Manual

35 Photo, Video & Audio Playback

Slideshow

The Slideshow function allows you to view all stored photos in a
continuous sequence.
To view a slideshow:
1. Press the MENU button to select SLIDESHOW from the menu.
2. Press the Up/Down navigation buttons and the OK button to select
from the available options:
• START: Select to start the slideshow.
• INTERVAL: Select to set the interval time between each photo during the slideshow.
The default setting is 5 seconds.
• LOOP: Select to enable/disable a continuous loop of the slideshow. Select ON or OFF (default)
from the submenu.
• EXIT: Select to exit to the main menu.

Resize

The Resize function allows you to change the image resolution.
To resize a photo:
1. Press the MENU button to select RESIZE from the menu.
2. Press the Up/Down navigation buttons and the OK button to select
the resize ratio you require: 6M, 4M, 2M, 1M, VGA, EXIT.
3. Select EXIT to return to the main menu.
Note:
It is only possible to scale-down image resolutions. If the current image resolution is VGA, this menu
item is disabled in the Resize submenu. The ratio of the image (3:2 or 16:9) remains unchanged after
resizing.
• This function only supports pictures taken with this camera
• Cropped images cannot be resized
• If there is not sufficient storage space, images cannot be resized
• If the SD/SDHC card is locked, images cannot be resized
• VGA images cannot be resized
Using the Playback Menu
Downloaded from ManualsCamera.com Manuals
SLIDESHOW
START
INTERVAL < 5SEC >
LOOP OFF
EXIT
RESIZE
6M
4M
2M
1M
VGA