Procedure 4.1 - Calibrating The Lift Motor - Precor 9.55 Manual

Procedure 4.1 - Calibrating the Lift Motor

1. Set the treadmill circuit breaker in the "off" position and unplug the line cord from the wall
outlet.
2. Remove the hood.
3. Place the treadmill on it's right side. Remove hitch and clevis pins that secure the lift tube to
the lift platform. See Diagram 4.1.
Diagram 4.1 - Lift Motor Mounting
Clevis Pin
Drive Screw
Lift Tube
Clevis Pin
Page 1-12
Hitch Pin
5/8"
Hitch Pin
9.55 Treadmill
Page 12