Procedure 4.1 - Calibrating The Lift Motor - Precor C954 Serivce Manual

Procedure 4.1 - Calibrating the Lift Motor

1. Set the treadmill circuit breaker in the "off" position and unplug the line cord from the wall
outlet.
2. Remove the hood.
3. Place the treadmill on its right side. Remove hitch and clevis pins that secure the lift tube to
the lift platform. See Diagram 4.1.
Diagram 4.1 - Lift Motor Mounting
Clevis Pin
Drive Screw
Lift Tube
Clevis Pin
Page 1-14
C954, C956 Treadmill
Hitch Pin
See Step 8
Hitch Pin
Page 14