Safety Label - Lopi Pioneer Bay Installation And Use Manual

Pellet insert
Hide thumbs Also See for Pioneer Bay:
Table of Contents

Advertisement

WARNING - DO NOT REMOVE OR COVER THIS LABEL
Listed Pelletized Solid Fuel Burning Appliance
For use in masonry or factory built (ZC) fireplaces.
R
Serial No.
Model: Heritage Bay PI
Report Date: June, 1997
Tested to: UL 1482/ULC S627/CSA B366.2/ASTM E1509-95
Maximum Input Rating: 3.5 lbs (1.60 kg)/hr
This pellet appliance has been tested and listed for use in manufactured homes
in accordance with Oregon Administrative Rules 814-23-900 through 814-23-909.
Install and use only in accordance with the installation and operating
instructions. Contact local building or fire officials about restrictions and
installation inspection in your area. Do not remove bricks or mortar from
masonry fireplace or alter factory built fireplace.
Combustible floor beyond hearth extension must be protected by a non-combustible material, extending 6 in/150 mm (E) to the front and 6 in/150 mm (F)
to the sides of door opening. Do Not Connect This Unit to a Chimney Flue Serving Another Appliance. Components Required for Masonry Fireplace and
Factory Built Fireplace Installation: Listed 3 in/75 mm or 4 in/100 mm diameter flue liner.
For use with 1/4 in/6 mm to 5/16 in/7 mm diameter pelletized wood fuels only. Replace glass only with 5 mm ceramic glass.
Do not route power cord beneath heater. The space beneath the heater must not be obstructed. Do not obstruct combustion air openings. Operate only with
viewing door closed and ash tray in place. Keep all furnishings well away from heater. Do Not Overfire – If Heater or Chimney Connector Glows, You Are
Overfiring. Inspect And Clean Chimney Frequently – Under Certain Conditions of Use, Creosote Buildup May Occur Rapidly.
CAUTION
- HOT WHILE IN OPERATION.
- DO NOT TOUCH, KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.
- CONTACT MAY CAUSE SKIN BURNS. SEE THE OWNER'S MANUAL.
Travis Industries

Safety Label

Travis Industries, Inc.
10850 117th Pl. NE
Kirkland, WA 98033
Electrical Rating : 115 V., 60 Hz., 3 Amp
4 0 2 0 2 0 4
INSERT CLEARANCE DIAGRAM
MANTEL
B
C
A
Pellet
Insert
F
E
HEARTH
EXTENSION
Minimum Clearance to Combustible Materials
(Measured from insert top)
Adjacent Sidewall
A
Mantel
B
Top Facing
C
Side Facing
D
DATE OF MANUFACTURE
1997
Jan.
1998
Feb.
1999
Mar.
2000
Apr.
3 1
D
9 in/230 mm
13 in/330 mm
10 in/255 mm
6 in/150 mm
May
Sep.
Jun.
Oct.
Jul.
Nov.
Aug.
Dec.
9 3 5 0 8 0 5 1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Heritage bay pi

Table of Contents