Safety Instruction - K-array KA7 User Manual

ENGLISH

SAFETY INSTRUCTION

WARNING
• To reduce the risk of electric shock, disconnect the amplifier from the AC mains
before installing audio cable. Reconnect the power cord only after making all signal
connections.
• Connect the amplifier to a two-pole, three wire grounding mains receptacle. The
receptacle must be connected to a fuse or circuit breaker. Connection to any other type
of receptacle poses a shock hazard and may violate local electrical codes.
• Do not install the amplifier in wet or humid locations without using weather protection.
• Do not allow water or any foreign object to get inside the amplifier. Do not put objects
containing liquid on, or near, the unit.
• To reduce the risk of overheating the amplifier, avoid exposing it to direct sunlight. Do
not install the unit near heat emitting appliances, such as a room heater or stove.
• No naked flame sources such like lighted candles should be placed on the device.
• The amplifier should be placed so that its location does not interfere with its proper
ventilation. For example, the appliance should not be situated on a bed, carpet, or
similar surface that may create an obstacle for the ventilation openings.
• CAUTION, RISK OF ELECTRIC SHOCK, DO NOT OPEN. This amplifier contains
potentially hazardous voltages. Do not attempt to disassemble the unit. The unit
contains no user serviceable parts. Repairs should be performed only by factory trained
service personnel.
• Be sure that both voltage set by the selector on the device and AC Power have the
same value.
6