INSTALLATION
ELECTRICAL CONNECTION
For your protection, we recommend that a qualified electrician install this appliance.
The electrician should be familiar with electrical installations and your local electrical requirements.
Proper connections and power supply are essential for efficient performance. The supply circuit should
be properly fused as required by local electrical code.
WARNING
Before making any electrical connection be sure to read data plate which is located on the
rear of the unit.
Electrical Grounding Instructions
This unit is equipped with a -prong (grounded) plug for your protection against shock hazard and must
be plugged directly into a properly grounded -prong receptacle.
CAUTION
DO NOT CUT OR REMOVE THIS PLUG OR GROUNDED PRONG FROM THE PLUG.
CONNECT/PLUG UNIT INTO DEDICATED A.C. LINE ONLY SPECIFIED ON THE DATA
PLATE OF THE UNIT.
PRESET TIME
If adjustments are required, please refer to the time programming section in this manual.
°F/°C CONVERSION
To change the temperature display from °F to °C or from °C to °F, hold the TEMP button while the unit is
turned off. While holding the TEMP button, turn the unit on. The display will be the changed temperature
mode. To change back, repeat the procedure.
5