General Information; Purchasers Responsibility - Star FS1R Installation And Operation Instructions Manual

GENERAL INFORMATION

CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced in
its operation and is not sold for consumer use in and around the home nor for use directly by the general
public in food service locations.
Before using your new equipment read and understand all the instructions & labels associated with the
unit prior to putting it into operation. Make sure all people associated with its use understand the units
operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This unit has
been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is
received in damaged condition, either apparent or concealed, a claim must be made with the delivering
carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 5 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.
These models are equipped for the voltage and wattage indicated on the nameplate. These units are
designed to operate on alternating current (A.C.), two wire single phase service only and are equipped
with an approved lead in cord set with a three prong grounding type plug.
DO NOT CONNECT TO DIRECT CURRENT (D.C.).
UNPACKING
Carefully remove the steamer from the shipping and packing & protective material. Remove all removable
parts and clean with hot water and mild detergent. Wipe the unit using damp cloth. Never hose down
the unit with water, this steamer has
Unit should also contain:
• Operations manual & Authorized Service Agent Listing Packet
• Inlet Hose Assembly (non-reservoir units only)
• Spatula tray (front loading units only)

Purchasers Responsibility

• To see that the electric & water services for the unit are installed on site in accordance with
the manufacturer's specifications and municipal codes.
• A water pressure regulator must be used, failure to operate this unit without a regulator will
result in situations that will damage the unit.
4