Operation Troubleshooting - Star FS1R Installation And Operation Instructions Manual

OPERATION TROUBLESHOOTING

DIAGNOSTICS FOR ELECTRONIC CONTROL STEAMERS
Shorted Temperature Probe
Open-Circuit Temperature Probe
No Heat/No Steam
Heat / No Steam Temperature To Cool
If unit still does not operate contact the factory or one of its representatives or a local service
company for service or required maintenance.
output power will be shut-off to all relays.
if a temperature probe is detected, the
output power will be shut-off to all relays.
If relay malfunction is detected when the
temperature is below 50°F (66°C) for
Relay Malfunction 0 minutes or reaches 500°F (260°C).
The output power will be shut-off to both
relays unit the error no longer occurs.
Probe Temperature is 200°F (9°C) less
2
Less than 50 Ohms of resistance, if
a temperature probe is detected, the
than the programmed set point.
Press the "TEMP" switch,
the LED will display
"PrOB"
Press the "TEMP" switch,
the LED will display
"PrOB"
The display will blink
"rELY"
Program & Heat Indicator
Light will Flash.