Component Identification - Kärcher HDS 3.9/30 Pe Cage Operator's Manual

22mm
Coupling
Outlet
Burner Fuel
Tank
Pump — Delivers a specific gpm to the high pressure
nozzle which develops pressure.
Starter Grip— Used for star ting the engine
manually.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Unloader Valve— Safety device which allows
pressure to be released when spray gun is closed.
High Pressure Hose — Connect one end to
water pump discharge nipple and the other end to
spray gun.
6
COMPONENT IDENTIFICATION SMALL
Flue Adapter
Optional 7-10049
Insulation Gasket
Optional 7-01471
Detergent
Valve
Trigger
Spray Gun
High
Pressure
Hose
9.800-080.0 - G • HDS 600-606
Wand
Starter Grip
Adjustable Thermostat — Safety control which
prevents temperatures from going above adjustable
setting.
Wand — Must be connected to the spray gun.
NOTE: If trigger on spray gun is released for more
than 2 minutes, warm water will discharge from pump
protector onto floor. This system prevents internal
pump damage.
NOTE: If flue adapter is installed, the burner assembly
air adjustment must be adjusted.
Water
Supply Hose
(not included)
Adjustable
Thermostat
Burner
Switch
Hour Meter
Power
Nozzle
Pump
Unloader Valve
98000800-2