Kärcher HDS 3.9/30 Pe Cage Operator's Manual page 9

STEP 7: (Electric Start Models) Turn the engine
switch to "Start" position.
Burner
Switch
Thermostat
STEP 9: Turn the burner switch
"ON". Turn thermostat dial to the
210° mark.
OPERATING INSTRUCTIONS
On-Off
Switch
98000800-14
98000800-16
STEP 10: (Pump Steam Option)
A. Operate machine as instructed.
B. Open steam valve counter-
c l o ck w i s e , w h i c h w i l l l o w e r
pressure.
C. Turn thermostat knob to 250°F.
D. When steam is no longer desired,
Turn steam valve clockwise and
thermostat knob to 200°F.
9.800-080.0 - G • HDS 600-606
OFF
STEP 8: (Electric Start Models) Turn the key to the
START position, and hold it there until the engine starts.
If the engine fails to start within 5 seconds, release the
key, and wait at least 10 seconds before operating the
starter again.
Using the electric starter for more than 5 seconds
at a time will overheat the starter motor and can
damage it.
When the engine starts, release the key, allowing it to
return to the ON position. If the choke knob has been
pulled to the CLOSED position to start the engine,
gradually push it to the OPEN position as the engine
warms up.
Steam
Valve
98000800-17
WARNING! Never replace noz-
zle without engaging the safety
latch on the spray gun trigger.
ON
START
Engine
Switch
98000800-15
Safety
Latch
98000800-18
9