Specifications - Hitachi C 10FCH Technical Data And Service Manual

5. SPECIFICATIONS

0û (Right angle)
Maximum
Miter right/left 45û
cutting
dimensions
Height x
Miter right/left 52û
Width
(H x W) Bevel left 45û
Miter right/left 45û
+
Bevel left 45û
Miter cutting ranges
Bevel cutting ranges
Compound (miter + left bevel)
cutting ranges
Angle stopper positions
Saw blade outer diameter
Maximum output
Laser
marker
Wave length
(Only Model
C 10FCH)
Laser medium
Power source type and voltage
Type of motor
Full-load current
No-load rotation speed
Max. output
Main unit dimensions
Width x Depth x Height
C 10FCH
Weight
C 10FCE
Coating
Packaging
Cord
Standard accessories
Optional accessories
59 mm (2-5/16") x 144 mm (5-21/32")
89 mm (3-1/2") x 101 mm (3-31/32")
59 mm (2-5/16") x 102 mm (4")
89 mm (3-1/2") x 70 mm (2-3/4")
59 mm (2-5/16") x 89 mm (3-1/2")
89 mm (3-1/2") x 54 mm (2-1/8")
41 mm (1-5/8") x 144 mm (5-21/32")
41 mm (1-5/8") x 102 mm (4")
Right and left 0û --- 52û
Left 0û --- 48û
Miter: right and left 0û --- 45û, Bevel: left 0û --- 45û
Right and left 0û, 15û, 22.5û, 31.6û, 45û
255 mm (10") external dia.
<1 mW (CLASS II )
400 nm --- 700 nm
Laser diode
AC single phase 60 Hz, 120V
AC single phase commutator series motor
15 A
5,000 min -1
1,950 W
460 mm x 628 mm x 561 mm (18-1/8" x 24-3/4" x 22-3/32")
12.5 kg (27.6 Ibs.), gross weight 17 kg (37.5 Ibs.)
12 kg (26.5 Ibs.), gross weight 16.5 kg (36.4 Ibs.)
Gunmetallic silver
Corrugated cardboard box
Type: 2-conductor cabtire cable
Length: 1.8 m (6 ft)
255 mm (10") TCT saw blade (24 teeth, Code No. 318963)
• • • • • • • • • • • • • • •
Dust bag
Vise ass'y
10 mm box wrench
4 mm hex. bar wrench (only Model C 10FCH)
Sub fence
255 mm (10") TCT saw blade (60 teeth, Code No. 976472)
• • • • • • • • • • • • • • •
255 mm (10") TCT saw blade (100 teeth, Code No. 319658)
• • • • • • • • • • • • • • •
Extension holder and stopper
Crown molding vise ass'y (include crown molding stopper (L))
Crown molding stopper (L)
Crown molding stopper (R)
--- 4 ---
for wood cutting
for normal cutting
for aluminum cutting