Controls - Windsor Expert Instructions Manual

Brush Switch On/Off. Turns brush motor on and off.
1
Solution Switch On/Off. Turns solution pump on and off.
2
Vac Switch On/Off . Turns vacuum motor on and off.
3
4 Main Handle.
Solution Lever. Controls the amount of
5
flow of solution to the floor.
6 Brush Motor Circuit Breaker.
Protects brush motor from overheating.
Vac Motor Circuit Breaker. Protects the
7
vac motor from overheating.
8 Handle Adjustment Lever.
Adjusts the main handles angle.
9. Solution Tank Drain Hose.
10. Accessory Tool Connection. Solution connection for
accessory tools.
Accessory Hose Connection. Hose
11.
connection for accessory tool.
12. Cord Hook.
VIEW: FRONT of MACHINE
Dome
Recovery
Tank
Solution
Tank
10
11
Vacuum
Shoe / Brush
Housing
EXP 98363 08/25/04
VIEW: TOP of CONTROL
1
VIEW: REAR of MACHINE
5
6
9
NOTE: Attach strain relief/cord
ATTACH STRAIN RELIEF/CORD RETAINER TO
retainer to the power cord.
THE POWER CORD.
1. Make a loop in power cord approximately
12" from strain relief on machine.
2. Slide cord loop through slot
in retainer arm. Pull slack
cord back through slot to
secure. Attach retainer to
handle.

CONTROLS

2 3
4
12
8
7
3-2