Setup Field(S) - Symbol DS6707 Product Reference Manual

11 - 26 Symbol DS6707 Digital Imager Scanner Product Reference Guide
Send Data (continued)
Send Next 19 Characters

Setup Field(s)

Setup Field(s) Definitions
Table 11-1
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Scan the Move Cursor To Character on page
printable ASCII character from the
11-86. When this is used, the cursor moves to the position after the
matching character. If the character is not there, the rule fails and ADF
tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This parameter moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is 'A', then
the cursor moves past 'A', 'AA', 'AAA', etc. Scan the
Character on page 11-27, then select a character from the
Alphanumeric Keyboard on page
the cursor does not move (i.e., has no effect).
Scan one of these bar codes to select the number of positions ahead
to move the cursor.
Scan one of these bar codes to select the number of positions back to
move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. These
values must be set using the prefix/suffix values in
8-19.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Send Next 20 Characters
Description
11-27, then any
Alphanumeric Keyboard on page
Move Cursor Past
11-86. If the character is not there,
Table 8-4 on page
Page
11-27
11-27
11-27
11-28
11-29
11-29