Connecting Using Simple Serial Interface - Symbol DS6707 Product Reference Manual

6 - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide

Connecting Using Simple Serial Interface

Connect the digital imager scanner to an SSI host.
Serial Port Connector
to Host
SSI Host Connection
Figure 6-1
Attach the modular connector of the interface cable to the cable interface port on the digital imager scanner
1.
(see Installing the Interface Cable on page
Connect the other end of the interface cable to the serial port on the host.
2.
Connect the power supply to the serial connector end of the interface cable. Plug the power supply into an
3.
appropriate outlet.
Scan the appropriate baud rate bar code from
4.
setting.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
5.
Power Supply Cable
1-3).
Baud Rate on page 6-4
Interface Cable
that matches the host's baud rate