Host Serial Response Time-Out - Symbol DS6707 Product Reference Manual

6 - 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide

Host Serial Response Time-out

Parameter # 9Bh
This parameter specifies how long the decoder waits for an ACK or NAK before resending. Also, if the decoder
wants to send, and the host has already been granted permission to send, the decoder waits for the designated
time-out before declaring an error.
To set the delay period (options are 2, 5, 7.5, or 9,9 seconds), scan one of the following bar codes.
NOTE Other values are available via SSI command
*
Low - 2 Seconds
High - 7.5 Seconds
(14h)
(4Bh)
.
Medium - 5 Seconds
(32h)
Maximum - 9.9 Seconds
(63h)