Setup Field(S) - Symbol LS4278 Reference Manual

Send Data (continued)
Send Next 19 Characters

Setup Field(s)

Setup Field(s) Definitions
Table 14-2
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Scan the Move Cursor To Character on page
printable ASCII character from the
14-87. This moves the cursor to the position after the matching
character. If the character is not there, the rule fails and ADF tries the
next rule.
Scan this bar code to move the cursor to the beginning of the data.
This action moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is 'A', then
the cursor moves past 'A', 'AA', 'AAA', etc. Scan the
Character on page 14-28, then select a character from the
Alphanumeric Keyboard on page
the cursor does not move (i.e., has no effect).
Scan one of these bar codes to select the number of positions ahead
to move the cursor.
Scan one of these bar codes to select the number of positions back to
move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Advanced Data Formatting 14 - 27
Send Next 20 Characters
Description
14-28, then any
Alphanumeric Keyboard on page
Move Cursor Past
14-87. If the character is not there,
Table 7-4 on page
Page
14-28
14-28
14-28
14-29
14-30
14-30
7-18.