Connecting Cables - TANDBERG Maestro MXP User Manual

D1335803_TMaestro_MXP_User_Manual

2.2 Connecting Cables

1. Power cable
Find the right power cable that works for your country in the accessories box, and connect to
power cable from base, and to an electrical distribution socket.
2. Microphone cable
Connect the microphone cable to the microphone.
3. a) ISDN BRI
Connect the ISDN cables to the ISDN sockets (S/T interface) provided by your Network
Provider. Your main ISDN number will be that number associated with the socket to which
ISDN cable number 1 has been connected.
3. b) ISDN PRI
If you are using the PRI interface, the E1/T1 cable should be connected to a CSU (Channel
Service Unit). It is recommended that a CSU is used between your system and the PRI line
from your network provider, see
4. LAN cable
To connect your system to a Local Area Network (LAN), connect the cable labeled "LAN
Ethernet" to a suitable Ethernet port on your LAN.
5. External Display device
a. S-video – connect cable from Codec Video Out 1 to External display
b. DVI-I / VGA – find cable in accessories box and connect cable from DVI-I out single
on the Codec to external display
c. Composite – find cable in accessories box and connect cable from Video out 4 on the
Codec to external display
22
Appendix 7.