TANDBERG Maestro MXP User Manual page 86

D1335803_TMaestro_MXP_User_Manual
Using an external MCU that supports Chair Control (H.243)
With an external MCU that supports H.243, you have the following services:
 Request/Release Floor
 View Participant/End View
 Chair Control
If you take Chair control, you get the following services:
 Release Chair
 Assign Floor To Participant/Release Floor From Participant
 Disconnect Participant
 Terminate Meeting
Using an external MCU that does not support Chair Control
With an external MCU that does not support H.243, you have the following services:
 Request/Release Floor
 Terminal Names
86