Table of Contents
Advertisement
4
Check the labels overview.
MyLabel is added to the labels.
Add rules to MyLabel
Proceed as follows to add rules to MyLabel.
1
Switch to Expert mode and go to IP Router > Classification > Routing Rules.
2
Click New to add a new rule to MyLabel.
3
Click Apply to add the rule to the label. Repeating step 2 allows you to add a new rule to the label. You
can add as many rules as you want.
The label allows to identify packets with matching criteria, in this example HTTP traffic coming from lan.
If such a packet arrives it is "labelled" with packet classification label "MyLabel". Still no packet classified
routing is done. Only if you add a route that uses that particular label as route criterion, the effective
classification based routing is applied.
30
Packet Classification and Labelling
E-DOC-CTC-20051017-0168 v1.0
Chapter 4
Advertisement
Table of Contents
