Table of Contents
Advertisement
Chapter 2
The Thomson Gateway FIB entries
IP Route Table Values
The following table explains the values used in the routing table.
Name
Destination
Label
Gateway
Interface
Metric
Add a route to the IP route table
Proceed as follows:
1
Click New and fill in the fields.
2
Click Apply.
3
The route is added in the IP route table.
4
Click Save All to save the configuration.
E-DOC-CTC-20051017-0168 v1.0
Description
The destination IP address(es) for this route.
The name of the packet classification label (more details about labels in next
chapter).
The IP address of the next hop. This hop must be directly connected.
Note
The parameters
gateway
Only for interface routes: the outgoing IP interface name.
Note
The parameters
gateway
The metric for this route (weight factor).
The lower the metric, the higher the weight.
The default is 0.
and
intf
are mutually exclusive.
and
intf
are mutually exclusive.
11
Advertisement
Table of Contents
