Table of Contents
Advertisement
Expected results
To check whether the interface route is created, check the routing table.
The route with destination 20.0.0.0/8 and interface lan1 is added to the routing table.
i
If the IP address of an interface is changed, the interface routes are changed as well. You can use
Interface routes:
>
if the network is directly connected.
>
for point-to-point links, where only one host will receive the packet, being the next hop.
i
A gateway IP address followed by an asterisk means that this is an interface route of which the IP
address is filled by the Thomson Gateway.
18
Chapter 3
Standard IP forwarding
E-DOC-CTC-20051017-0168 v1.0
Advertisement
Table of Contents
