Sony HDW-F500 Operation Manual page 100

4-5 PF1 Menu (Factory Settings)
Adjusting the R–Y output level (D1)
Make this adjustment with the ALT/[F4] (R–Y
LEVEL) buttons.
p r s t : 100% (4000H)
v a l u e : N u m e r i c a l 0.0 to 141.3%
r a n g e : A d j u s t a b l e –∞ to +3 dB
Adjusting the video output level (D2)
Make this adjustment with the ALT/[F5] (VIDEO
LEVEL) buttons.
p r s t : 100% (4000H)
v a l u e : N u m e r i c a l 0.0 to 141.3%
r a n g e : A d j u s t a b l e –∞ to +3 dB
Adjusting the chroma output level (D2)
Make this adjustment with the ALT/[F6] (CHROMA
GAIN) buttons.
p r s t : 100% (4000H)
v a l u e : N u m e r i c a l 0.0 to 141.3%
r a n g e : A d j u s t a b l e –∞ to +3 dB
Adjusting the hue (D2)
Make this adjustment with the ALT/[F7] (HUE)
buttons.
p r s t : 0° (0)
v a l u e : N u m e r i c a l –30 to +30
r a n g e : A d j u s t a b l e –30° to +30°
Adjusting the setup level (D2)
Make this adjustment with the ALT/[F8] (SETUP
LEVEL) buttons.
p r s t : 7.5 IRE (7.5)
v a l u e : N u m e r i c a l 0 to +10.0
r a n g e : A d j u s t a b l e 0 to +10.0 IRE
4-58
Chapter 4 Menu Settings
Adjusting the sync phase (D1/D2)
Use this setting to precisely match the output phase of
the VTR to the reference signal or when using a
switcher or other device connected to another VTR to
create special effects such as fading, wrapping, and
dissolving.
To adjust the output signal sync phase with respect to
the reference input, make this adjustment with the
ALT/[F9] (SYNC PHASE) buttons.
p r s t : 0 (0)
v a l u e : N u m e r i c a l –128 to +127
r a n g e : A d j u s t a b l e –0.5 to +0.5H
Fine adjustment of the sync phase (D1/D2)
Make this adjustment with the ALT/[F10] (FINE)
buttons.
p r s t : 0 (0)
v a l u e : N u m e r i c a l 0 to 1024
r a n g e : A d j u s t a b l e 0 to 296 nsec