Switching Of Buss Pan Follows St Pan During Automation Is Now Disabled; Slave Lock Processing When Cascade Connection Is Cancelled; Store Button In The Library/Automation Lcd Screen; Maintenance Items In V1.20 - Tascam DM-3200 Release Notes

DM-3200 Release Notes

DTRS REC function setting in P2

ª
A problem has been fixed in which it had been impossible
to set the REC function for track 9 or higher when using
P2 to control DTRS.

Switching of BUSS PAN Follows ST PAN during automation is now disabled

Switching the BUSS PAN Follows ST PAN on/off while
automation is operating has now been disabled. If you
attempt to switch this while automation is operating, a
popup message will appear, and the change will not be
accepted.

Slave Lock processing when cascade connection is cancelled

A UI improvement has been made so that when you cancel
the cascade connection, the clock master of the slave
device is set to Internal. When you attempt to cancel the
cascade connection, the following popup message will
appear.

STORE button in the library/automation LCD screen

When you press the button in the various screens,
STORE
the resulting operation had been the same as when press-
ing the STORE AS button. This has been changed so that
the operation is the same as when you press the top panel
key.
STORE

Maintenance items in V1.20

•
Rare instances of routing crosstalk have been addressed
•
Automation data file handling has been improved
•
Where the CF card is close to full
•
When creating a new project
•
When using the Keep function
•
Pink noise generated by the oscillator is now more accurate
•
Rare instances of not being able to exit Initial Edit after
writing automation have been addressed
•
Rare instances of +
CTRL
data have been addressed

TASCAM DM-3200 Release Notes V1.50
over-writing protected
STORE

MX-2424 REC function setting via MMC

ª
A problem has been fixed in which the REC function could
not be set correctly when controlling the MX-2424 via MMC.
Popup message:
Cannot do this
while automatio is running.
Popup message:
CASCADE Connection ended.
Please choose new clock master.
Set Internal Clock?
Press
ENTER
or cursor key to cancel.
When you press the ENTER
set to Internal.
The file name used when you store by pressing the
button in the
AUTOMATION>FILES
when you store by pressing the
to confirm,
key, the clock master will be
STORE
screen is now the same as
KEEP key.