Quick Start; Starting Out With The Time Code; Access The Automation Screens; Turn On The Automation - Tascam DM-24 Automation Manual

2 – Quick Start
While the DM-24 automation system is extremely
powerful, it is also very easy to use. This Quick Start
covers much of what you need to know to run the

Starting out with the time code

1
Connect a LTC or MTC (time code) source to
the Time Code or MIDI input on the rear
panel of the DM-24. Choose the appropriate

Access the automation screens

2
Press the
AUTOMATION
automation screens on the display. If you do
not see the AUTO MAIN

Turn on the automation

3 Move the cursor to the onscreen
ENGINE button and press the
6
TASCAM DM-24 Automation
key to access the
display, press the
AUTOMATION
key to
ENTER
system. The rest of the manual provides details on
the concepts of the system and how to use it to its
fullest potential.
setting in the OPTION
sure your recorder is set to output the correct
type of time code.
key repeatedly until you see
AUTOMATION
.
AUTO MAIN
EXT.CTRL
MIDI/MC AUTOMATION SHIFT
0 CLR
turn on the automation system:.
– SYNC/TC display. Be
30
EDIT
40
-dB
UNDO
ENTER