Connection; Setting Devices For Midi Control; Selecting Devices For Midi Control; Selecting Control Types For The Devices - Tascam DM-3200 Release Notes

Connection

Connect the and
MIDI IN MIDI OUT
and the MIDI device bi-directionally. You may also use
these controllers as "send only" as well by just connecting
the port of the DM-3200 to the MIDI device.
MIDI OUT

Setting devices for MIDI control

Setting of the MIDI control setup is carried out on the
REMOTE>EXT.CTRL screen.

Selecting devices for MIDI control

ª
The
EXTERNAL CONTROL LIST
initially blank. To add external devices from the list use
the following procedure:
1 Turn the POD 4 knob or the
choose an item from the device list (
). In the case of MIDI control, highlight
DEVICES
either MIDI Ctrlrs , MIDI FADERS,
2 When the device to be controlled by the DM-3200 is
highlighted on the list, move the cursor to the
button, and press the
ENTER
be added to the EXTERNAL CONTROL LIST
the screen.
Figure 6: REMOTE>EXT.CTRL screen
NOTE
To obtain more information regarding a particular
item in the list of devices that may be controlled by the
DM-3200, highlight the item, move the cursor to the
INFO button, and press the ENTER key. A pop-up screen
provides information regarding the selected item.

Selecting control types for the devices

ª
Each of the columns on the EXTERNAL CONTROL LIST
display the following when an MIDI device is added to the list.
: A one-way arrow ® is displayed, representing an
STATE
open-loop device.
DEVICE : The name of the device is displayed together with
the number of channels available for transmitting control
signals. MIDI control has 16 channels.
: If the device is a MIDI controller,
ID
ports of a DM-3200
on the left of the screen is
JOG/DATA dial to
SUPPORTED
or MIDI Mixer .
ADD
key. The device will
on the left of
will
indicates the MIDI
ID
DM-3200 Release Notes
channel of the device being controlled by the DM-3200.
If the device is a MIDI fader
MIDI Control Change message (0 - 119). Nothing will be
displayed in this column if the device is a
PORT : This displays the output port. For
" MIDI " will automatically display.
: This displays the channel number used in the fader
CH
layer. It will display "
MIDI faders and MIDI mixers

Setting up individual devices

ª
To access the set-up screen of the individual devices listed
in the
EXTERNAL CONTROL LIST
( Jump to SCREEN
key.
NOTE
You can also go to the set-up screen of the individual
devices by using the CONTROL button at the bottom
right on the screen and use the following procedure:
1 Press the POD 4
the list of devices.
Figure 7: Pull-up screen for switching devices
2 Use the
POD 4
want to set.
3 Press the POD 4
TASCAM DM-3200 Release Notes V1.50
, ID displays the number of the
MIDI mixer
MIDI controls
" for an , "1-16" for
-- MIDI controller
.
, move the cursor to the
) button and press the
key. A pull-up menu will display
knob to highlight the device you
key to select the device.
.
,
ENTER
1