Monitor Connections & Trouble Shooting - Lorex L21Q784 Instruction Manual

MONITOR CONNECTIONS:
1
2
1. Camera 1 Input
Connect one end of the supplied 65ft cable to the first wired camera, the
other end to camera Input 1
2. Camera 2 – 8 Inputs
Connect optional additional cameras to the camera 2-8 inputs using either
the DIN or BNC camera inputs
TROUBLE SHOOTING:
If the system does not function properly, please check the following points.
MONITOR
Too dark or bright picture
NO POWER
Poor picture quality
Picture but no sound
Shrinking picture
WIRED No Picture
CAMERA
Picture Flickering or
Over Exposed
PROBLEM REMEDY
Readjust the CONTRAST or BRIGHTNESS controls
Check for AC connection NO POWER
Clean the camera lens. Readjust the CONTRAST or
BRIGHTNESS controls
Adjust the VOLUME
Check the condition of the POWER source
Check the cable for any lose connection
Make sure the camera is not facing any direct light
or sunlight
-15-