Lorex L21Q784 Instruction Manual page 14

BLANK COLOR: Choose between blue, gray or black as the background screen color in
VCR OUT:
OSD POSITION: Change the location of on-screen display, including the Time/Date,
DEFAULT SET: Selecting [Y] resets all programmed settings, including the date, back to
8. Monitor Set – Adjust the monitor's Contrast, Brightness, Sharpness, Color and Tint. You will
see this menu on your camera setting rather than on a blue background, enabling you to see
the changes being made to the picture.
Note: you can switch between Quad and Full Screen views while adjusting the monitor
settings by pressing the
9. Exit – Select exit to return to the previous viewing mode.
Note: 20 seconds of inactivity in Menu mode will also exit the Menu.
Menu Mode.
When set to [ACTUAL], the system will output what is shown on the
monitor to a VCR. When set to [QUAD], the VCR will record Quad mode,
regardless of what's appearing on the screen.
camera titles, and other messages (such as Zoom, Alarm, etc).
There are four different positions where the OSD can be placed on-screen.
the default factory settings.
, buttons.
-11-