Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich
4.19 Front panel
Removing the Front panel
The following describes the procedure for removing the front panel. (See Figure 4-31.)
1. Remove the front panel from the base assembly while lifting the system board up
slightly.
Installing the Front panel
The following describes the procedure for installing the front panel. (See Figure 4-31.)
1. Set the front panel to the system board in place while lifting the system board up
slightly.
NOTE: After setting the front panel, make sure that the wireless communication switch
moves properly.
4-54
[CONFIDENTIAL]
Figure 4-31 Removing the front panel
PORTÉGÉ M700/M750 Maintenance Manual (960-661)
Front panel