The Three Steps To Multitrack - Tascam 488 Portastudio Owner's Manual

The Three Steps to Multitrack

The diagram below depicts how signals from
equipment connected to the 488 c an be routed.
In TRACK ING and Overdubbing, the mixer inputs
are usually microphones or instruments, going
IC. different tracks of the recorder. In
OVERDUBBING, the MONITOR section and TAPE
CUE of the mixer must be used to listen to
previous tracks w hile you record new ones, so
there is a tw o-w ay flow through the console. In
MIXDOWN, signal comes from the multitrack
and is sent to an external 2-t rac k recorder.
6