Tascam 488 Portastudio Owner's Manual page 19

Stopping to record
Putting track into "Safe"
Track 1 playback through CUE MONITOR
Locating tape to 0000
Routing inputs
Routing tape signals to
CUE
Monitor selection
Begin to play
CUE MASTER level
adjustment
Stop in play
19
9. Press STOP to stop the tape and terminate recording.
10. The REC "1" indicator in the meter should now be blinking as
before. Press the RECORD FUNCTION "1" sw itch to turn that
indicator off.
1. Press the RT Z key. The tape will rew ind, automatically stopping at
counter zero point
2. Set the channel 1 INPUT ASSIGN switch to the center OFF
position.
3. Turn the channel's TAPE control all the w ay to the right/CUE
position.
4. Press CUE in the MONITOR selec t sw itches, so you can hear the
tape.
5. Press PLAY.
6. Slow ly turn the CUE MASTER control to the right You will hear
w hat you have recorded on trac k 1 in your headphones.
7. Press STOP to stop play.