Jet JFM-5 Brochure

JET JFM-5 Hollow Chisel Mortiser
Cutting accurate mortises can be a challenging task. The JET JFM-5
Hollow Chisel Mortiser is designed to produce extremely accurate
mortises in a wide range of woods and project designs, plus make this an
easy task for the woodworker. The JET JFM-5 Hollow Chisel Mortiser
has been designed and built to extend its value by maintaining its
performance for many years under the demands of even busy
woodworking shops.
We begin with a heavy-duty cast iron and steel frame for stability,
accuracy and repeatability – not to mention long-term durability.
Precision machining insures accuracy and smooth operation. The liberal
use of cast iron gives the JET JFM-5 Hollow Chisel Mortiser a
stabilizing mass of 267 pounds.
The massive powerhead casting slides on oversized dovetail keyways
that feature easy to use Gib screw adjusters that allow the user to
compensate for tiny amounts of wear should that occur in years to come. We also applied Gib
screw adjusters to the X –Y material table motions to provide ultimate control over feel and
long-term accuracy.

Base Cabinet

The JET JFM-5 Hollow Chisel Mortiser is mounted atop an all-steel,
enclosed base cabinet. The cabinet is 14"-wide, 16"-deep, 23 ½"-tall and
features an internal storage area for chisels, related tools and accessories.
The base cabinet puts the JET JFM-5 Hollow Chisel Mortiser table
surface at a comfortable 31 ½" height above the floor. The overall height
of the JET JFM-5 Hollow Chisel Mortiser on its base cabinet is 61".
If mobility is a priority in your shop, the JET JFM-5 Hollow Chisel
The all-steel base cabinet
Mortiser
has storage for the auger &
can be placed in one of our universal mobile bases (#708118). The JET
chisel sets and related
JFM-5 Hollow Chisel Mortiser can then be easily moved to the most
tools. Add one of our
universal mobile bases and
efficient workspace that is available.
the JFM-5 easily goes
where you can use it best.
The JET JFM-5 Mortiser is
as tough as it is accurate
and versatile.