Sw Board - Toshiba TECRA A11 Series Maintenance Manual

4.10 SW board

Removing the SW board
To remove the SW board, follow the steps below and refer to Figure 4-20.
1. Disconnect the SW board FFC from the connector CN9500 on the system board.
2. Push down the hook and slide the SW board in the direction as shown in the figure
below to remove it.
SW board
Guide
CN9500
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-35
SW board FFC
Figure 4-20 Removing the SW board
Hook