Advertisement
Safety
Getting Started
Home
Prev Next
Installation
USB Drivers
Installing USB Drivers on Windows 2000
Follow these steps to install USB drivers on Windows 2000.
1
Make sure the Cable Modem is on (the Power light should be on). If not,
connect the AC adapter as described in
2
Insert the CD that came with the Cable Modem package into the CD-ROM
drive.
3
Plug the appropriate end of the USB cable into the Cable Modem and the
other end into the computer's USB port.
The following window appears, indicating that the PC has detected a new
USB device:
4
Wait for the system to start the installation wizard and display the following
window (there may be a short delay):
Touchstone CM450 Cable Modem User's Guide
Usage
Troubleshooting
Connecting the Cable
Glossary
Modem.
19
Advertisement
