Welch Allyn Atlas Operator's Manual page 15

Trend Data - Trend data is captured every time
blood pressure is measured, whether this event is
automatic or manual. Trend data is also
automatically captured every 15 minutes if blood
pressure intervals are longer, or blood pressure is
not used. Push the
Trend
data. Scroll through the trend data with either
button. Push again to return to the
Trend
waveform display. The monitor will hold up to
144 lines of trend data, which is 36 hours if data is
captured every 15 minutes.
Printing - A printer option is available with both
models 621xx and 622xx, and is a standard model
623xx feature. Push the
is on the screen. If the waveforms are displayed
on the screen, the
Print
of waveforms plus all the current measurements.
The printout captures data from 9 seconds before
the button was pressed until 6 seconds after.
Print
Note: If any measurements exceed the alarm
limits, they will be marked with asterisks on
the printout. If trend data is displayed on the
screen, prints all the trend data. If the
Print
Print On Alarm configuration is set to Yes, and
a Patient Alarm or Measurement Invalid Alarm
occurs, Atlas will print the current
measurements and the currently configured
waveforms automatically.
If your model of the Atlas Monitor does not have
the optional printer, the
, and it freezes, or halts, the waveform
Freeze
display for 10 seconds to permit studying of the
waveform.
button to see the trend
button to print what
Print
button prints 15 seconds
button is labeled
Print
Set
3