Section 1: Building The Boat Stand - ProBoat Shockwave Instruction Manual

Section 1: Building the Boat Stand

Parts Needed
• Plywood boatstand pieces (4)
Step 1. There are 4 plywood boatstand pieces. The 2 short ply-
wood pieces are the ends of the boat stand. Notice that one of
the two short pieces has a channel cut out in the center for the
stuffing box to clear.
Step 2. Attach the 2 long plywood pieces of the interlocking
boatstand to one end of the short plywood pieces. Repeat with
the remaining short plywood pieces.
Tools and Adhesives Needed
• CA or epoxy
Step 3. Secure the interlocking boatstand with medium thick
CA or epoxy.
5