Vga Issue; Audio Issue - SOYO SY-K8USA DRAGON Ultra User Manual

VGA Issue

I cannot set my VGA to go higher than 16 color (640x 480).
1. Install/ re-install the VGA driver.
After waking up from Suspend to RAM or Standby mode, the screen has
no display but I can hear the hard disk operating
1. Check the VGA card manufacturer for a driver update (if using a
different video card then the onboard video), and make sure the
VGA card supports the Suspend to Ram function.
2. Update your VGA card's BIOS (in the case of a video card other
then the onboard video). Check your VGA card manufacturer for
more details.

Audio Issue

How can I disable the on-board Audio?
Go to the SOYO Combo Feature in BIOS setup, then set the "AC97 Audio"
setup option to disabled.
I cannot get the sound working on my system.
1. Check if the speaker wire is connected to the line out connector on
the M/B.
2. Check if the speaker power is powered on.
3. Install the audio driver supplied on our driver disc.
4. Check BIOS setup if "AC97 Audio" setup option is enabled.
5. If sound already installed, check our website for audio driver
updates.
The sound is working in my system, but when I play CD music from the
CD-ROM, I do not get any sound. What is wrong?
This is because the 3-wire audio cable from the CD-ROM to the on-board
CDIN1 connector in the M/B is not connected. See the beginning of this guide
for the location of CDIN1.
115