•
For 1.65v CPU the maximum you can adjust is 0.200v
•
For 1.70v CPU the maximum you can adjust is 0.150v
•
For 1.75v CPU the maximum you can adjust is 0.100v
This is in accordance to the Voltage Identification (VID) Specification
given by AMD.
VGA Issue
I cannot set my VGA to go higher than 16 color (640x 480).
1.
Make sure that you have installed the SiS AGP driver.
2. Install/ re-install the VGA driver.
After wake-up from Suspend to RAM or Standby mode, the screen has
no display but I can hear the hard disk operating
1.
Install SiS AGP driver.
2.
Check the VGA card manufacturer for driver update. Or make sure
the VGA card support Suspend to Ram function
Audio Issue
How can I disable the on-board Audio?
Go to the SOYO Combo Feature in the BIOS setup, then set the "onboard
6CH H/W audio" to disable.
I cannot get the sound working on my system.
1.
Check if the speaker wire is connected to the line out connector in
the M/B.
2.
Check if the speaker power is powered on.
3.
Install the audio driver supplied on our driver disc.
4. Check BIOS setup if "onboard 6CH H/W audio" is enabled.
5. If sound already installed, check our website for audio driver
update.
I cannot get the sound working on the 5.1 channel speaker.
1.
Install the audio driver and application. Check driver installation
for more info.
188
.