Chapter 2 Hardware Installation; Preparations - SOYO SY-K8USA DRAGON Ultra User Manual

Hardware Installation
HARDWARE INSTALLATION
Congratulations on your purchase of SY-K8USA DRAGON ULTRA
Motherboard. You are about to install and connect your new Motherboard.
Note: Do not unpack the Motherboard from its protective
anti-static packaging until you have made the following

preparations.

2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to complete the
installation successfully:
1. Socket mPGA754 processor with CPU cooling fan.
2. DDR memory module(s)
3. A computer case with an adequate power supply unit (350W for a
minimally loaded system or 400W for a fully loaded system).
4. Monitor
5. Keyboard
6. Pointing Device (mouse)
7. Disk Drives: HDD, CD-ROM, Floppy drive...
8. External Peripherals: Printer and Modem (optional)
9. VGA Card (AGP or PCI)
Note: This M/B only supports 1.5V AGP VGA cards! 3.3V AGP cards
are not supported!
SY-K8USA DRAGON Ultra
Chapter 2
13