Warn-Protos; Workaround <Workaround>[,<Workaround>]; Write-Files; Write-Opts - Analog Devices VISUALDSP++ 3.5 Manual

Compiler Command-Line Interface
-w
The (disable all warnings) switch directs the compiler not to issue
-w
warnings.
You can invoke this switch by selecting the Disable all warnings
and remarks check box in the VisualDSP++ Project Options dia-
log box, Compile tab, Warning selection.

-warn-protos

The
-warn-protos
produce a warning message when a function is called without a full proto-
type being supplied.
-workaround <workaround>[,<workaround>]*
The -
workaround
hardware defects. Example of a valid workaround:

-write-files

The
-write-files
piler driver to redirect the file name portions of its command line through
a temporary file. This technique helps with handling long file names,
which can make the compiler driver's command line too long for some
operating systems.

-write-opts

The
-write-opts
options (but not the input file names) to the main driver via a temporary
file. This can be helpful if the resulting main driver command line would
otherwise be too long.
1-50
(prototypes warning) switch directs the compiler to
switch enables code generator workaround for specific
(enable driver I/O redirection) switch directs the com-
switch directs the compiler to pass the user-specified
VisualDSP++ 3.5 C/C++ Compiler and Library Manual
.
type32a-anomaly
for ADSP-219x DSPs