Specifying Compiler Options In Visualdsp - Analog Devices VISUALDSP++ 3.5 Manual

Specifying Compiler Options in VisualDSP++

When using the VisualDSP++ Integrated Development and Debug Envi-
ronment (IDDE), use the Compile tab from the Project Options dialog
box to get compiler functional options as shown on
Figure 1-1. Project Options – Compile Property Page
There are four sub-pages you can access—General, Preprocessor, Proces-
sor, and Warning. Most project options have a corresponding compiler
command-line switch described in
VisualDSP++ 3.5 C/C++ Compiler and Library Manual
for ADSP-219x DSPs
Figure
"Compiler Command-Line Switches"
Compiler
1-1.
1-11